source: svn/trunk/newcon3bcm2_21bu/toolchain/mipsel-linux-uclibc/include/asm/sgi/gio.h

Last change on this file was 2, checked in by jglee, 11 years ago

first commit

  • Property svn:executable set to *
File size: 2.6 KB
Line 
1/*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
6 * gio.h: Definitions for SGI GIO bus
7 *
8 * Copyright (C) 2002 Ladislav Michl
9 */
10
11#ifndef _SGI_GIO_H
12#define _SGI_GIO_H
13
14/*
15 * GIO bus addresses
16 *
17 * The Indigo and Indy have two GIO bus connectors. Indigo2 (all models) have
18 * three physical connectors, but only two slots, GFX and EXP0.
19 *
20 * There is 10MB of GIO address space for GIO64 slot devices
21 * slot#   slot type address range            size
22 * -----   --------- ----------------------- -----
23 *   0     GFX       0x1f000000 - 0x1f3fffff   4MB
24 *   1     EXP0      0x1f400000 - 0x1f5fffff   2MB
25 *   2     EXP1      0x1f600000 - 0x1f9fffff   4MB
26 *
27 * There are un-slotted devices, HPC, I/O and misc devices, which are grouped
28 * into the HPC address space.
29 *   -     MISC      0x1fb00000 - 0x1fbfffff   1MB
30 *
31 * Following space is reserved and unused
32 *   -     RESERVED  0x18000000 - 0x1effffff 112MB
33 *
34 * GIO bus IDs
35 *
36 * Each GIO bus device identifies itself to the system by answering a
37 * read with an "ID" value. IDs are either 8 or 32 bits long. IDs less
38 * than 128 are 8 bits long, with the most significant 24 bits read from
39 * the slot undefined.
40 *
41 * 32-bit IDs are divided into
42 *      bits 0:6        the product ID; ranges from 0x00 to 0x7F.
43 *      bit 7           0=GIO Product ID is 8 bits wide
44 *                      1=GIO Product ID is 32 bits wide.
45 *      bits 8:15       manufacturer version for the product.
46 *      bit 16          0=GIO32 and GIO32-bis, 1=GIO64.
47 *      bit 17          0=no ROM present
48 *                      1=ROM present on this board AND next three words
49 *                      space define the ROM.
50 *      bits 18:31      up to manufacturer.
51 *
52 * IDs above 0x50/0xd0 are of 3rd party boards.
53 *
54 * 8-bit IDs
55 *      0x01            XPI low cost FDDI
56 *      0x02            GTR TokenRing
57 *      0x04            Synchronous ISDN
58 *      0x05            ATM board [*]
59 *      0x06            Canon Interface
60 *      0x07            16 bit SCSI Card [*]
61 *      0x08            JPEG (Double Wide)
62 *      0x09            JPEG (Single Wide)
63 *      0x0a            XPI mez. FDDI device 0
64 *      0x0b            XPI mez. FDDI device 1
65 *      0x0c            SMPTE 259M Video [*]
66 *      0x0d            Babblefish Compression [*]
67 *      0x0e            E-Plex 8-port Ethernet
68 *      0x30            Lyon Lamb IVAS
69 *      0xb8            GIO 100BaseTX Fast Ethernet (gfe)
70 *
71 * [*] Device provide 32-bit ID.
72 *
73 */
74
75#define GIO_ID(x)               (x & 0x7f)
76#define GIO_32BIT_ID            0x80
77#define GIO_REV(x)              ((x >> 8) & 0xff)
78#define GIO_64BIT_IFACE         0x10000
79#define GIO_ROM_PRESENT         0x20000
80#define GIO_VENDOR_CODE(x)      ((x >> 18) & 0x3fff)
81
82#define GIO_SLOT_GFX_BASE       0x1f000000
83#define GIO_SLOT_EXP0_BASE      0x1f400000
84#define GIO_SLOT_EXP1_BASE      0x1f600000
85
86#endif /* _SGI_GIO_H */
Note: See TracBrowser for help on using the repository browser.