source: svn/newcon3bcm2_21bu/magnum/portinginterface/ads/7552/bads_coef.h

/******************************************************************************
 *    (c)2011-2012 Broadcom Corporation
 * 
 * This program is the proprietary software of Broadcom Corporation and/or its licensors,
 * and may only be used, duplicated, modified or distributed pursuant to the terms and
 * conditions of a separate, written license agreement executed between you and Broadcom
 * (an "Authorized License").  Except as set forth in an Authorized License, Broadcom grants
 * no license (express or implied), right to use, or waiver of any kind with respect to the
 * Software, and Broadcom expressly reserves all rights in and to the Software and all
 * intellectual property rights therein.  IF YOU HAVE NO AUTHORIZED LICENSE, THEN YOU
 * HAVE NO RIGHT TO USE THIS SOFTWARE IN ANY WAY, AND SHOULD IMMEDIATELY
 * NOTIFY BROADCOM AND DISCONTINUE ALL USE OF THE SOFTWARE.  
 *  
 * Except as expressly set forth in the Authorized License,
 *  
 * 1.     This program, including its structure, sequence and organization, constitutes the valuable trade
 * secrets of Broadcom, and you shall use all reasonable efforts to protect the confidentiality thereof,
 * and to use this information only in connection with your use of Broadcom integrated circuit products.
 *  
 * 2.     TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS" 
 * AND WITH ALL FAULTS AND BROADCOM MAKES NO PROMISES, REPRESENTATIONS OR 
 * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO 
 * THE SOFTWARE.  BROADCOM SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES 
 * OF TITLE, MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, 
 * LACK OF VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION 
 * OR CORRESPONDENCE TO DESCRIPTION. YOU ASSUME THE ENTIRE RISK ARISING OUT OF 
 * USE OR PERFORMANCE OF THE SOFTWARE.
 * 
 * 3.     TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO EVENT SHALL BROADCOM OR ITS 
 * LICENSORS BE LIABLE FOR (i) CONSEQUENTIAL, INCIDENTAL, SPECIAL, INDIRECT, OR 
 * EXEMPLARY DAMAGES WHATSOEVER ARISING OUT OF OR IN ANY WAY RELATING TO YOUR 
 * USE OF OR INABILITY TO USE THE SOFTWARE EVEN IF BROADCOM HAS BEEN ADVISED OF 
 * THE POSSIBILITY OF SUCH DAMAGES; OR (ii) ANY AMOUNT IN EXCESS OF THE AMOUNT 
 * ACTUALLY PAID FOR THE SOFTWARE ITSELF OR U.S. $1, WHICHEVER IS GREATER. THESE 
 * LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF 
 * ANY LIMITED REMEDY.
 *
 * $brcm_Workfile: bads_coef.h $
 * $brcm_Revision: 10 $
 * $brcm_Date: 2/9/12 12:44p $
 * 
 * Module Description:
 * 
 * Revision History:
 * 
 * $brcm_Log: /AP/ctfe/core/ads/bads_coef.h $
 * 
 * 10   2/9/12 12:44p farshidf
 * SW3128-1: merge to main
 * 
 * Fw_Integration_Devel/2   2/9/12 12:14p farshidf
 * SW3128-1: merge to integ
 * 
 * Fw_Integration_Devel/AP_V3_0_ADS_DEV/2   1/30/12 5:16p cbrooks
 * sw3128-1:scaled coefficients for low baud rate
 * 
 * Fw_Integration_Devel/AP_V3_0_ADS_DEV/1   12/12/11 4:14p cbrooks
 * sw3128-1:added FOI coefficients
 * 
 * 8   6/9/11 6:14p mpovich
 * SW3461-1: Merge Ver 0.4 Integ. onto main branch.
 * 
 * SW_System_4_Integ_Test/1   6/9/11 11:43a mpovich
 * SW3461-1: Integrate latest from all devel. branches .
 * 
 * ADS_3128_3/4   6/2/11 11:50a farshidf
 * SW3128-1: update the header file
 * 
 * 7   6/2/11 10:50a farshidf
 * SW3128-1: move the code to c file
 * 
 * 6   5/10/11 3:12p farshidf
 * SW3128-1: merge main
 * 
 * ADS_3128_3/3   5/5/11 8:14p cbrooks
 * sw3128-1:Cleanup Code
 * 
 * ADS_3128_3/2   5/1/11 3:30p cbrooks
 * sw3128-1:Cleaned up Channel Scan Code
 * 
 * ADS_3128_3/1   4/28/11 1:08p cbrooks
 * sw3128-1:New Code for scan
 * 
 * 4   4/26/11 6:52p farshidf
 * SW3128-1: merge main
 * 
 * ADS_3128_2/1   4/26/11 4:25p cbrooks
 * sw3128-1:New code for 330
 * 
 *****************************************************************************/

#ifndef BADS_COEF_H__
#define BADS_COEF_H__

#ifdef __cplusplus
extern "C" {
#endif

#define NUM_QAM_MODES 7
#define NUM_BAUD_RATES 33
#define REQUIRED_SNR16Q 13
#define SYSTEM_NF        0

extern const uint32_t BaudRates_TBL[NUM_BAUD_RATES];
extern const int8_t ChannelNoisePower_TBL[NUM_BAUD_RATES];
extern const uint32_t PhaseLoopAcqCoeffs_TBL[NUM_BAUD_RATES];
extern const uint32_t PhaseLoopTrkCoeffs_TBL[NUM_BAUD_RATES];
extern const uint32_t PhaseLoopTrkBurstModeCoeffs_TBL[NUM_BAUD_RATES];
extern const uint16_t TimingLoopAcqCoeffs_TBL[NUM_BAUD_RATES];
extern const uint16_t TimingLoopTrk1Coeffs_TBL[NUM_BAUD_RATES];
extern const uint16_t TimingLoopTrk2Coeffs_TBL[NUM_BAUD_RATES];
extern const uint16_t FrequencyLoopCoeffs_TBL[NUM_BAUD_RATES];
extern const uint16_t FrequencyLoopBurstModeCoeffs_TBL[NUM_BAUD_RATES];
typedef struct PhaseLoopSweep_s
{
uint16_t PosSweepRate;
uint32_t PosSweepStart;
uint16_t NegSweepRate;
uint32_t NegSweepStart;
uint16_t SweepTime;
}PhaseLoopSweep_t; 
extern const PhaseLoopSweep_t PhaseLoopSweepAnnexA_TBL[NUM_BAUD_RATES];
typedef struct PhaseLoopSweep_FFT_s
{
uint16_t PosSweepRate;
uint32_t PosSweepStart;
uint16_t SweepTime;
}PhaseLoopSweep_FFT_t;
extern  const PhaseLoopSweep_FFT_t PhaseLoopSweepAnnexA_FFT_TBL[NUM_BAUD_RATES];
extern const PhaseLoopSweep_t PhaseLoopSweepAnnexB_TBL[2];
extern const uint32_t SNRLTHRESH_TBL[NUM_QAM_MODES];
#if 0
extern const uint32_t SNRHTHRESH_TBL[NUM_QAM_MODES];
#endif
extern const uint32_t SNRHTHRESH_TBL[NUM_QAM_MODES];
typedef struct FEC_s
{
uint32_t DS_FECU;
uint32_t DS_FECM;
uint32_t DS_FECL;
uint32_t DS_FECOUT_NCON;
uint32_t DS_FECOUT_NCODL;
}FEC_t;

extern const FEC_t AnnexA_FEC_TBL[NUM_QAM_MODES];
extern const FEC_t AnnexB_FEC_TBL[NUM_QAM_MODES];
extern const uint32_t DS_EQ_CTL_TBL[NUM_QAM_MODES];
extern const uint32_t DS_EQ_CPL_TBL[NUM_QAM_MODES];



#ifdef __cplusplus
}
#endif

#endif