source: svn/newcon3bcm2_21bu/toolchain/mips-linux-uclibc/include/asm/termbits.h @ 43

Last change on this file since 43 was 43, checked in by megakiss, 11 years ago

광주방송 OTC 주파수 369Mhz로 변경

  • Property svn:executable set to *
File size: 7.0 KB
Line 
1/*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License.  See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
6 * Copyright (C) 1995, 1996, 1999, 2001 Ralf Baechle
7 * Copyright (C) 1999 Silicon Graphics, Inc.
8 * Copyright (C) 2001 MIPS Technologies, Inc.
9 */
10#ifndef _ASM_TERMBITS_H
11#define _ASM_TERMBITS_H
12
13#include <linux/posix_types.h>
14
15typedef unsigned char cc_t;
16#if (_MIPS_SZLONG == 32)
17typedef unsigned long speed_t;
18typedef unsigned long tcflag_t;
19#endif
20#if (_MIPS_SZLONG == 64)
21typedef __u32 speed_t;
22typedef __u32 tcflag_t;
23#endif
24
25/*
26 * The ABI says nothing about NCC but seems to use NCCS as
27 * replacement for it in struct termio
28 */
29#define NCCS    23
30struct termios {
31        tcflag_t c_iflag;               /* input mode flags */
32        tcflag_t c_oflag;               /* output mode flags */
33        tcflag_t c_cflag;               /* control mode flags */
34        tcflag_t c_lflag;               /* local mode flags */
35        cc_t c_line;                    /* line discipline */
36        cc_t c_cc[NCCS];                /* control characters */
37};
38
39/* c_cc characters */
40#define VINTR            0              /* Interrupt character [ISIG].  */
41#define VQUIT            1              /* Quit character [ISIG].  */
42#define VERASE           2              /* Erase character [ICANON].  */
43#define VKILL            3              /* Kill-line character [ICANON].  */
44#define VMIN             4              /* Minimum number of bytes read at once [!ICANON].  */
45#define VTIME            5              /* Time-out value (tenths of a second) [!ICANON].  */
46#define VEOL2            6              /* Second EOL character [ICANON].  */
47#define VSWTC            7              /* ??? */
48#define VSWTCH          VSWTC
49#define VSTART           8              /* Start (X-ON) character [IXON, IXOFF].  */
50#define VSTOP            9              /* Stop (X-OFF) character [IXON, IXOFF].  */
51#define VSUSP           10              /* Suspend character [ISIG].  */
52#if 0
53/*
54 * VDSUSP is not supported
55 */
56#define VDSUSP          11              /* Delayed suspend character [ISIG].  */
57#endif
58#define VREPRINT        12              /* Reprint-line character [ICANON].  */
59#define VDISCARD        13              /* Discard character [IEXTEN].  */
60#define VWERASE         14              /* Word-erase character [ICANON].  */
61#define VLNEXT          15              /* Literal-next character [IEXTEN].  */
62#define VEOF            16              /* End-of-file character [ICANON].  */
63#define VEOL            17              /* End-of-line character [ICANON].  */
64
65/* c_iflag bits */
66#define IGNBRK  0000001         /* Ignore break condition.  */
67#define BRKINT  0000002         /* Signal interrupt on break.  */
68#define IGNPAR  0000004         /* Ignore characters with parity errors.  */
69#define PARMRK  0000010         /* Mark parity and framing errors.  */
70#define INPCK   0000020         /* Enable input parity check.  */
71#define ISTRIP  0000040         /* Strip 8th bit off characters.  */
72#define INLCR   0000100         /* Map NL to CR on input.  */
73#define IGNCR   0000200         /* Ignore CR.  */
74#define ICRNL   0000400         /* Map CR to NL on input.  */
75#define IUCLC   0001000         /* Map upper case to lower case on input.  */
76#define IXON    0002000         /* Enable start/stop output control.  */
77#define IXANY   0004000         /* Any character will restart after stop.  */
78#define IXOFF   0010000         /* Enable start/stop input control.  */
79#define IMAXBEL 0020000         /* Ring bell when input queue is full.  */
80#define IUTF8   0040000         /* Input is UTF8 */
81
82/* c_oflag bits */
83#define OPOST   0000001         /* Perform output processing.  */
84#define OLCUC   0000002         /* Map lower case to upper case on output.  */
85#define ONLCR   0000004         /* Map NL to CR-NL on output.  */
86#define OCRNL   0000010
87#define ONOCR   0000020
88#define ONLRET  0000040
89#define OFILL   0000100
90#define OFDEL   0000200
91#define NLDLY   0000400
92#define   NL0   0000000
93#define   NL1   0000400
94#define CRDLY   0003000
95#define   CR0   0000000
96#define   CR1   0001000
97#define   CR2   0002000
98#define   CR3   0003000
99#define TABDLY  0014000
100#define   TAB0  0000000
101#define   TAB1  0004000
102#define   TAB2  0010000
103#define   TAB3  0014000
104#define   XTABS 0014000
105#define BSDLY   0020000
106#define   BS0   0000000
107#define   BS1   0020000
108#define VTDLY   0040000
109#define   VT0   0000000
110#define   VT1   0040000
111#define FFDLY   0100000
112#define   FF0   0000000
113#define   FF1   0100000
114/*
115#define PAGEOUT ???
116#define WRAP    ???
117 */
118
119/* c_cflag bit meaning */
120#define CBAUD   0010017
121#define  B0     0000000         /* hang up */
122#define  B50    0000001
123#define  B75    0000002
124#define  B110   0000003
125#define  B134   0000004
126#define  B150   0000005
127#define  B200   0000006
128#define  B300   0000007
129#define  B600   0000010
130#define  B1200  0000011
131#define  B1800  0000012
132#define  B2400  0000013
133#define  B4800  0000014
134#define  B9600  0000015
135#define  B19200 0000016
136#define  B38400 0000017
137#define EXTA B19200
138#define EXTB B38400
139#define CSIZE   0000060         /* Number of bits per byte (mask).  */
140#define   CS5   0000000         /* 5 bits per byte.  */
141#define   CS6   0000020         /* 6 bits per byte.  */
142#define   CS7   0000040         /* 7 bits per byte.  */
143#define   CS8   0000060         /* 8 bits per byte.  */
144#define CSTOPB  0000100         /* Two stop bits instead of one.  */
145#define CREAD   0000200         /* Enable receiver.  */
146#define PARENB  0000400         /* Parity enable.  */
147#define PARODD  0001000         /* Odd parity instead of even.  */
148#define HUPCL   0002000         /* Hang up on last close.  */
149#define CLOCAL  0004000         /* Ignore modem status lines.  */
150#define CBAUDEX 0010000
151#define    B57600 0010001
152#define   B115200 0010002
153#define   B230400 0010003
154#define   B460800 0010004
155#define   B500000 0010005
156#define   B576000 0010006
157#define   B921600 0010007
158#define  B1000000 0010010
159#define  B1152000 0010011
160#define  B1500000 0010012
161#define  B2000000 0010013
162#define  B2500000 0010014
163#define  B3000000 0010015
164#define  B3500000 0010016
165#define  B4000000 0010017
166#define CIBAUD    002003600000  /* input baud rate (not used) */
167#define CMSPAR    010000000000  /* mark or space (stick) parity */
168#define CRTSCTS   020000000000          /* flow control */
169
170/* c_lflag bits */
171#define ISIG    0000001         /* Enable signals.  */
172#define ICANON  0000002         /* Do erase and kill processing.  */
173#define XCASE   0000004
174#define ECHO    0000010         /* Enable echo.  */
175#define ECHOE   0000020         /* Visual erase for ERASE.  */
176#define ECHOK   0000040         /* Echo NL after KILL.  */
177#define ECHONL  0000100         /* Echo NL even if ECHO is off.  */
178#define NOFLSH  0000200         /* Disable flush after interrupt.  */
179#define IEXTEN  0000400         /* Enable DISCARD and LNEXT.  */
180#define ECHOCTL 0001000         /* Echo control characters as ^X.  */
181#define ECHOPRT 0002000         /* Hardcopy visual erase.  */
182#define ECHOKE  0004000         /* Visual erase for KILL.  */
183#define FLUSHO  0020000
184#define PENDIN  0040000         /* Retype pending input (state).  */
185#define TOSTOP  0100000         /* Send SIGTTOU for background output.  */
186#define ITOSTOP TOSTOP
187
188/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
189#define TIOCSER_TEMT    0x01    /* Transmitter physically empty */
190
191/* tcflow() and TCXONC use these */
192#define TCOOFF          0       /* Suspend output.  */
193#define TCOON           1       /* Restart suspended output.  */
194#define TCIOFF          2       /* Send a STOP character.  */
195#define TCION           3       /* Send a START character.  */
196
197/* tcflush() and TCFLSH use these */
198#define TCIFLUSH        0       /* Discard data received but not yet read.  */
199#define TCOFLUSH        1       /* Discard data written but not yet sent.  */
200#define TCIOFLUSH       2       /* Discard all pending data.  */
201
202/* tcsetattr uses these */
203#define TCSANOW         TCSETS  /* Change immediately.  */
204#define TCSADRAIN       TCSETSW /* Change when pending output is written.  */
205#define TCSAFLUSH       TCSETSF /* Flush pending input before changing.  */
206
207#endif /* _ASM_TERMBITS_H */
Note: See TracBrowser for help on using the repository browser.