source: svn/trunk/newcon3bcm2_21bu/toolchain/mips-linux-uclibc/include/linux/pmu.h

/*
 * Definitions for talking to the PMU.  The PMU is a microcontroller
 * which controls battery charging and system power on PowerBook 3400
 * and 2400 models as well as the RTC and various other things.
 *
 * Copyright (C) 1998 Paul Mackerras.
 */


#define PMU_DRIVER_VERSION      2

/*
 * PMU commands
 */
#define PMU_POWER_CTRL0         0x10    /* control power of some devices */
#define PMU_POWER_CTRL          0x11    /* control power of some devices */
#define PMU_ADB_CMD             0x20    /* send ADB packet */
#define PMU_ADB_POLL_OFF        0x21    /* disable ADB auto-poll */
#define PMU_WRITE_NVRAM         0x33    /* write non-volatile RAM */
#define PMU_READ_NVRAM          0x3b    /* read non-volatile RAM */
#define PMU_SET_RTC             0x30    /* set real-time clock */
#define PMU_READ_RTC            0x38    /* read real-time clock */
#define PMU_SET_VOLBUTTON       0x40    /* set volume up/down position */
#define PMU_BACKLIGHT_BRIGHT    0x41    /* set backlight brightness */
#define PMU_GET_VOLBUTTON       0x48    /* get volume up/down position */
#define PMU_PCEJECT             0x4c    /* eject PC-card from slot */
#define PMU_BATTERY_STATE       0x6b    /* report battery state etc. */
#define PMU_SMART_BATTERY_STATE 0x6f    /* report battery state (new way) */
#define PMU_SET_INTR_MASK       0x70    /* set PMU interrupt mask */
#define PMU_INT_ACK             0x78    /* read interrupt bits */
#define PMU_SHUTDOWN            0x7e    /* turn power off */
#define PMU_CPU_SPEED           0x7d    /* control CPU speed on some models */
#define PMU_SLEEP               0x7f    /* put CPU to sleep */
#define PMU_POWER_EVENTS        0x8f    /* Send power-event commands to PMU */
#define PMU_I2C_CMD             0x9a    /* I2C operations */
#define PMU_RESET               0xd0    /* reset CPU */
#define PMU_GET_BRIGHTBUTTON    0xd9    /* report brightness up/down pos */
#define PMU_GET_COVER           0xdc    /* report cover open/closed */
#define PMU_SYSTEM_READY        0xdf    /* tell PMU we are awake */
#define PMU_GET_VERSION         0xea    /* read the PMU version */

/* Bits to use with the PMU_POWER_CTRL0 command */
#define PMU_POW0_ON             0x80    /* OR this to power ON the device */
#define PMU_POW0_OFF            0x00    /* leave bit 7 to 0 to power it OFF */
#define PMU_POW0_HARD_DRIVE     0x04    /* Hard drive power (on wallstreet/lombard ?) */

/* Bits to use with the PMU_POWER_CTRL command */
#define PMU_POW_ON              0x80    /* OR this to power ON the device */
#define PMU_POW_OFF             0x00    /* leave bit 7 to 0 to power it OFF */
#define PMU_POW_BACKLIGHT       0x01    /* backlight power */
#define PMU_POW_CHARGER         0x02    /* battery charger power */
#define PMU_POW_IRLED           0x04    /* IR led power (on wallstreet) */
#define PMU_POW_MEDIABAY        0x08    /* media bay power (wallstreet/lombard ?) */

/* Bits in PMU interrupt and interrupt mask bytes */
#define PMU_INT_PCEJECT         0x04    /* PC-card eject buttons */
#define PMU_INT_SNDBRT          0x08    /* sound/brightness up/down buttons */
#define PMU_INT_ADB             0x10    /* ADB autopoll or reply data */
#define PMU_INT_BATTERY         0x20    /* Battery state change */
#define PMU_INT_ENVIRONMENT     0x40    /* Environment interrupts */
#define PMU_INT_TICK            0x80    /* 1-second tick interrupt */

/* Other bits in PMU interrupt valid when PMU_INT_ADB is set */
#define PMU_INT_ADB_AUTO        0x04    /* ADB autopoll, when PMU_INT_ADB */
#define PMU_INT_WAITING_CHARGER 0x01    /* ??? */
#define PMU_INT_AUTO_SRQ_POLL   0x02    /* ??? */

/* Bits in the environement message (either obtained via PMU_GET_COVER,
 * or via PMU_INT_ENVIRONMENT on core99 */
#define PMU_ENV_LID_CLOSED      0x01    /* The lid is closed */

/* I2C related definitions */
#define PMU_I2C_MODE_SIMPLE     0
#define PMU_I2C_MODE_STDSUB     1
#define PMU_I2C_MODE_COMBINED   2

#define PMU_I2C_BUS_STATUS      0
#define PMU_I2C_BUS_SYSCLK      1
#define PMU_I2C_BUS_POWER       2

#define PMU_I2C_STATUS_OK       0
#define PMU_I2C_STATUS_DATAREAD 1
#define PMU_I2C_STATUS_BUSY     0xfe


/* Kind of PMU (model) */
enum {
        PMU_UNKNOWN,
        PMU_OHARE_BASED,        /* 2400, 3400, 3500 (old G3 powerbook) */
        PMU_HEATHROW_BASED,     /* PowerBook G3 series */
        PMU_PADDINGTON_BASED,   /* 1999 PowerBook G3 */
        PMU_KEYLARGO_BASED,     /* Core99 motherboard (PMU99) */
        PMU_68K_V1,             /* 68K PMU, version 1 */
        PMU_68K_V2              /* 68K PMU, version 2 */
};

/* PMU PMU_POWER_EVENTS commands */
enum {
        PMU_PWR_GET_POWERUP_EVENTS      = 0x00,
        PMU_PWR_SET_POWERUP_EVENTS      = 0x01,
        PMU_PWR_CLR_POWERUP_EVENTS      = 0x02,
        PMU_PWR_GET_WAKEUP_EVENTS       = 0x03,
        PMU_PWR_SET_WAKEUP_EVENTS       = 0x04,
        PMU_PWR_CLR_WAKEUP_EVENTS       = 0x05
};

/* Power events wakeup bits */
enum {
        PMU_PWR_WAKEUP_KEY              = 0x01, /* Wake on key press */
        PMU_PWR_WAKEUP_AC_INSERT        = 0x02, /* Wake on AC adapter plug */
        PMU_PWR_WAKEUP_AC_CHANGE        = 0x04,
        PMU_PWR_WAKEUP_LID_OPEN         = 0x08,
        PMU_PWR_WAKEUP_RING             = 0x10
};
        
/*
 * Ioctl commands for the /dev/pmu device
 */
#include <linux/ioctl.h>

/* no param */
#define PMU_IOC_SLEEP           _IO('B', 0)
/* out param: __u32*    backlight value: 0 to 15 */
#define PMU_IOC_GET_BACKLIGHT   _IOR('B', 1, size_t)
/* in param: __u32      backlight value: 0 to 15 */
#define PMU_IOC_SET_BACKLIGHT   _IOW('B', 2, size_t)
/* out param: __u32*    PMU model */
#define PMU_IOC_GET_MODEL       _IOR('B', 3, size_t)
/* out param: __u32*    has_adb: 0 or 1 */
#define PMU_IOC_HAS_ADB         _IOR('B', 4, size_t) 
/* out param: __u32*    can_sleep: 0 or 1 */
#define PMU_IOC_CAN_SLEEP       _IOR('B', 5, size_t) 
/* no param, but historically was _IOR('B', 6, 0), meaning 4 bytes */
#define PMU_IOC_GRAB_BACKLIGHT  _IOR('B', 6, size_t)