source: svn/trunk/newcon3bcm2_21bu/toolchain/mips-linux-uclibc/include/linux/rtc.h @ 52

Last change on this file since 52 was 2, checked in by jglee, 11 years ago

first commit

  • Property svn:executable set to *
File size: 3.5 KB
Line 
1/*
2 * Generic RTC interface.
3 * This version contains the part of the user interface to the Real Time Clock
4 * service. It is used with both the legacy mc146818 and also  EFI
5 * Struct rtc_time and first 12 ioctl by Paul Gortmaker, 1996 - separated out
6 * from <linux/mc146818rtc.h> to this file for 2.4 kernels.
7 *
8 * Copyright (C) 1999 Hewlett-Packard Co.
9 * Copyright (C) 1999 Stephane Eranian <eranian@hpl.hp.com>
10 */
11#ifndef _LINUX_RTC_H_
12#define _LINUX_RTC_H_
13
14/*
15 * The struct used to pass data via the following ioctl. Similar to the
16 * struct tm in <time.h>, but it needs to be here so that the kernel
17 * source is self contained, allowing cross-compiles, etc. etc.
18 */
19
20struct rtc_time {
21        int tm_sec;
22        int tm_min;
23        int tm_hour;
24        int tm_mday;
25        int tm_mon;
26        int tm_year;
27        int tm_wday;
28        int tm_yday;
29        int tm_isdst;
30};
31
32/*
33 * This data structure is inspired by the EFI (v0.92) wakeup
34 * alarm API.
35 */
36struct rtc_wkalrm {
37        unsigned char enabled;  /* 0 = alarm disable, 1 = alarm disabled */
38        unsigned char pending;  /* 0 = alarm pending, 1 = alarm not pending */
39        struct rtc_time time;   /* time the alarm is set to */
40};
41
42/*
43 * Data structure to control PLL correction some better RTC feature
44 * pll_value is used to get or set current value of correction,
45 * the rest of the struct is used to query HW capabilities.
46 * This is modeled after the RTC used in Q40/Q60 computers but
47 * should be sufficiently flexible for other devices
48 *
49 * +ve pll_value means clock will run faster by
50 *   pll_value*pll_posmult/pll_clock
51 * -ve pll_value means clock will run slower by
52 *   pll_value*pll_negmult/pll_clock
53 */ 
54
55struct rtc_pll_info {
56        int pll_ctrl;       /* placeholder for fancier control */
57        int pll_value;      /* get/set correction value */
58        int pll_max;        /* max +ve (faster) adjustment value */
59        int pll_min;        /* max -ve (slower) adjustment value */
60        int pll_posmult;    /* factor for +ve correction */
61        int pll_negmult;    /* factor for -ve correction */
62        long pll_clock;     /* base PLL frequency */
63};
64
65/*
66 * ioctl calls that are permitted to the /dev/rtc interface, if
67 * any of the RTC drivers are enabled.
68 */
69
70#define RTC_AIE_ON      _IO('p', 0x01)  /* Alarm int. enable on         */
71#define RTC_AIE_OFF     _IO('p', 0x02)  /* ... off                      */
72#define RTC_UIE_ON      _IO('p', 0x03)  /* Update int. enable on        */
73#define RTC_UIE_OFF     _IO('p', 0x04)  /* ... off                      */
74#define RTC_PIE_ON      _IO('p', 0x05)  /* Periodic int. enable on      */
75#define RTC_PIE_OFF     _IO('p', 0x06)  /* ... off                      */
76#define RTC_WIE_ON      _IO('p', 0x0f)  /* Watchdog int. enable on      */
77#define RTC_WIE_OFF     _IO('p', 0x10)  /* ... off                      */
78
79#define RTC_ALM_SET     _IOW('p', 0x07, struct rtc_time) /* Set alarm time  */
80#define RTC_ALM_READ    _IOR('p', 0x08, struct rtc_time) /* Read alarm time */
81#define RTC_RD_TIME     _IOR('p', 0x09, struct rtc_time) /* Read RTC time   */
82#define RTC_SET_TIME    _IOW('p', 0x0a, struct rtc_time) /* Set RTC time    */
83#define RTC_IRQP_READ   _IOR('p', 0x0b, unsigned long)   /* Read IRQ rate   */
84#define RTC_IRQP_SET    _IOW('p', 0x0c, unsigned long)   /* Set IRQ rate    */
85#define RTC_EPOCH_READ  _IOR('p', 0x0d, unsigned long)   /* Read epoch      */
86#define RTC_EPOCH_SET   _IOW('p', 0x0e, unsigned long)   /* Set epoch       */
87
88#define RTC_WKALM_SET   _IOW('p', 0x0f, struct rtc_wkalrm)/* Set wakeup alarm*/
89#define RTC_WKALM_RD    _IOR('p', 0x10, struct rtc_wkalrm)/* Get wakeup alarm*/
90
91#define RTC_PLL_GET     _IOR('p', 0x11, struct rtc_pll_info)  /* Get PLL correction */
92#define RTC_PLL_SET     _IOW('p', 0x12, struct rtc_pll_info)  /* Set PLL correction */
93
94#endif /* _LINUX_RTC_H_ */
Note: See TracBrowser for help on using the repository browser.