source: svn/trunk/zas_dstar/devices/Tuner/S5H1411/TunerDTVS205FH201A.h @ 2

/****************************************************************************/
/*                                                                          */
/*           Copyright (c) 2003 Trident Technologies, Inc.                  */
/*                       All rights reserved                                */
/*                                                                          */
/* The content of this file or document is CONFIDENTIAL and PROPRIETARY     */
/* to Trident Microsystems, Inc.  It is subject to the terms of a           */
/* License Agreement between Licensee and Trident Technologies, Inc.        */
/* restricting among other things, the use, reproduction, distribution      */
/* and transfer.  Each of the embodiments, including this information and   */
/* any derivative work shall retain this copyright notice                   */
/*                                                                          */
/****************************************************************************/
/****************************************************************************
 *  Copyright (C) 2003-2005, Trident Technologies, Inc. 
 *  Copyright (C) 2003-2005, Oren Semiconductor
 *              
 *  File:        TunerDTVS205FH201A.H
 *  
 *  Created:     01-25-05
 *  Description: This file contain header file code for DTVS205FH201A
 *  Modified by Alex, 2006-4-29
 *
 ****************************************************************************/
#ifndef TUNER_DTVS205FH201A_H
#define TUNER_DTVS205FH201A_H

#include "Cas2BGeneralDefinitions_dtvs205.h"

#define MAX_TUNER_SUPPORT 2
#define YIELD_TIME          3000

#if 1
//For Tuner DTVS205FH201A
typedef enum EN_TYPE_TUNERDTVS205FH201A_REF_DIVIDER_RATIO{
        TUNERDTVS205FH201A_REF_DIVIDER_RATIO_31_25 = 0,
        TUNERDTVS205FH201A_REF_DIVIDER_RATIO_50,
        TUNERDTVS205FH201A_REF_DIVIDER_RATIO_62_5,
//      TUNERDTVS205FH201A_REF_DIVIDER_RATIO_166_7
}TYPE_TUNERDTVS205FH201A_REF_DIVIDER_RATIO;

typedef enum EN_TYPE_TUNERDTVS205FH201A_AGC{
        TUNERDTVS205FH201A_AGC_102_A = 0,
        TUNERDTVS205FH201A_AGC_102_B,
        TUNERDTVS205FH201A_AGC_99,
        TUNERDTVS205FH201A_AGC_96,
        TUNERDTVS205FH201A_AGC_93,
        TUNERDTVS205FH201A_AGC_90,
        TUNERDTVS205FH201A_AGC_WIDE_BAND_OFF
}TYPE_TUNERDTVS205FH201A_AGC;

typedef enum EN_TYPE_TUNERDTVS205FH201A_CHARGE_PUMP{
        TUNERDTVS205FH201A_CHARGE_PUMP_20 = 0,
        TUNERDTVS205FH201A_CHARGE_PUMP_100
}TYPE_TUNERDTVS205FH201A_CHARGE_PUMP;

typedef enum EN_TYPE_TUNERDTVS205FH201A_AGC_TIME_CONSTANT{
        TUNERDTVS205FH201A_AGC_TIME_CONSTANT_50_MS = 0,
        TUNERDTVS205FH201A_AGC_TIME_CONSTANT_2_SEC
}TYPE_TUNERDTVS205FH201A_AGC_TIME_CONSTANT;

#if 1//20071016
#define DTVS205FH201A_DEVICE_ADDRESS_WRITE  0xC2
#define DTVS205FH201A_SLAVE_ADDRESS 0xC3
#else
#define DTVS205FH201A_DEVICE_ADDRESS_WRITE  0xC2                // can be read from i2c. Tuner I2C address
#define DTVS205FH201A_SLAVE_ADDRESS 0x86        // Alex modify , 0x86  PIN open, can be read from i2c. Tuner IF address
#endif

#define DTVS205FH201A_CHANNEL_DOES_NOT_FIT_ANY_FREQUENCY -1
#define DTVS205FH201A_SUCCESS 0
#define DTVS205FH201A_FREQUENCY_VALUE_OUT_OF_RANGE 1
#define DTVS205FH201A_VALUE_OUT_OF_RANGE 2
#define DTVS205FH201A_COULD_NOT_SET_N 3
#define DTVS205FH201A_BEFORE_SEND_BYTES_FAILED 4
#define DTVS205FH201A_AFTER_SEND_BYTES_FAILED 5
#define DTVS205FH201A_SEND_CONTROL_DATA_FAILED 6
#define DTVS205FH201A_CHANNEL_OUT_OF_RANGE 7

#define DTVS205FH201A_LOW_BAND_MIN 54000
#define DTVS205FH201A_LOW_BAND_MAX 168000
#define DTVS205FH201A_MID_BAND_MIN 168000
#define DTVS205FH201A_MID_BAND_MAX 470000
#define DTVS205FH201A_HIGH_BAND_MIN 470000
#define DTVS205FH201A_HIGH_BAND_MAX 863000
#define DTVS205FH201A_F_IF_KHZ 44000
#define DTVS205FH201A_N_MAX 32768 //15 bits

//20071110 add
#define DTVS205FH201A_100MHz 100000
#define DTVS205FH201A_168MHz 168000
#define DTVS205FH201A_700MHz 700000
#define DTVS205FH201A_866MHz 866000



int TunerDTVS205FH201ASendChannel(unsigned int uiChannel, int iAdjustFreqKHZ, CHANNEL_TABLE_TYPE iChannelTable,TYPE_TUNERDTVS205FH201A_REF_DIVIDER_RATIO iRefDividerRatio,unsigned int uiAgc, unsigned int uiAgcMode,unsigned int uiChargePump,unsigned int uiAgcTimeConstant);
int TunerDTVS205FH201ASendFreq(unsigned long ulFrequency,TYPE_TUNERDTVS205FH201A_REF_DIVIDER_RATIO iRefDividerRatio,unsigned int uiAgc, unsigned int uiAgcMode,unsigned int uiChargePump,unsigned int uiAgcTimeConstant);
int TunerDTVS205FH201ASendPicCarrier(unsigned long ulFrequency,TYPE_TUNERDTVS205FH201A_REF_DIVIDER_RATIO iRefDividerRatio,unsigned int uiAgc, unsigned int uiAgcMode,unsigned int uiChargePump,unsigned int uiAgcTimeConstant);
void DTVS205FH201ASetCPandStepSize(TYPE_TUNERDTVS205FH201A_REF_DIVIDER_RATIO iRefDividerRatio, TYPE_TUNERDTVS205FH201A_CHARGE_PUMP iRefChargePump, unsigned char* pucCb);
void DTVS205FH201ASetStepSize(TYPE_TUNERDTVS205FH201A_REF_DIVIDER_RATIO iRefDividerRatio, unsigned char* pucCb,unsigned char* pucCb2);
void DTVS205FH201ASetAGC(unsigned int uiAgc,    unsigned char* pucAb);
void DTVS205FH201ASetATC(unsigned int uiAgcTimeConstant,unsigned char* pucAb);
void DTVS205FH201AInitBytes(unsigned char* pucDb1,unsigned char* pucDb2,unsigned char* pucCb,unsigned char* pucBb);
BOOLEAN TunerDTVS205FH201ASetRFFreq(unsigned long ulFrequency,unsigned int iAgcMode ,unsigned char* pucBb);
BOOLEAN DTVS205FH201ASetN(unsigned long ulFrequency,TYPE_TUNERDTVS205FH201A_REF_DIVIDER_RATIO iRefDividerRatio, unsigned char* pucDb1,unsigned char* pucDb2);
unsigned int  DTVS205FH201ASendControlData(unsigned int uiAgcMode,unsigned char Db1,unsigned char Db2,unsigned char Cb,unsigned char Bb);
unsigned long TunerDTVS205FH201AGetFrequency(unsigned int uiChannelNumber,CHANNEL_TABLE_TYPE iChannelTable);

//-----------------------------------------------------------------------------------------------------------
// Function name        : SetTunerDTVS205FH201A
// Description      : controls the Thomson DTVS205FH201A tuner
// Return type          : INT: 0 - Succeeded to set the tuner, other value - Did not succeed to set the tuner
// Argument         : TYPE_TUNER_SET_OPTION TunerSet: Determines how to set the tuner PLL frequency
//                    by channel, by center frequency(Khz)  or by picture carrier(Khz).
// Argument         : void* pvTunerSet: The value to set according to TunerSet.
// Argument                     : CHANNEL_TABLE_TYPE iChannelTableType - determines which channel table will be selected to get the tuner pll frequency from the channel number.
// Argument         : TYPE_TUNERDTVS205FH201A_REF_DIVIDER_RATIO: Determines the reference divider ratio for the tuner 
// Argument         : TYPE_TUNERDTVS205FH201A_AGC: Determines the AGC value for the tuner
// Argument         : TYPE_TUNER_AGC_MODE: Determines if the tuner will internal AGC digital or analog
//                                        the default value is TUNERDTVS205FH201A_AGC_MODE_EXTERNAL     
// Argument         : CHARGE_PUMP: Determines the charge pump value 
// Argument         : TYPE_TUNERDTVS205FH201A_AGC_TIME_CONSTANT: Determines the AGC time constant value, 
//-----------------------------------------------------------------------------------------------------------
int __stdcall SetTunerDTVS205FH201A(TYPE_TUNER_SET_OPTION TunerSet, void* pvTunerSet, int iAdjustFreqKHZ,
                                        CHANNEL_TABLE_TYPE iChannelTable,
                                        TYPE_TUNERDTVS205FH201A_REF_DIVIDER_RATIO iRefDividerRatio,
                                        TYPE_TUNERDTVS205FH201A_AGC iAgc,
                                        TYPE_TUNER_AGC_MODE iAgcMode,
                                        CHARGE_PUMP iChargePump,
                                        TYPE_TUNERDTVS205FH201A_AGC_TIME_CONSTANT iAgcTimeConstant);




//-----------------------------------------------------------------------------------------------------------
// Function name        : __stdcall SetChannel
// Description      : This function sets the tuner PLL frequencyand sends channel change command to the cascade2B DSP right after the 
//                                        tuner freuency was set. This function can perform set tuner PLL frequencyand operation by passing the parameters
//                                        usDelay = 0 and pstChannelChangeParameters = NULL
// Return type          : unsigned int - 0 If CC succeeded, a number greater than zero - if CC did not succeeded.
// Argument         : CAS_2B_TUNER_PARAMETERS stTunerParameters - this struct holds the parameters for the set tuner PLL frequencyand operation
//                                        The struct fields are:        
//                                        - TUNER_TYPE iTunerType - set the tuner type TUNER_DTVS205FH201A, TUNER_DTT7612 or TUNER_THOMSON_T_2000
//                                        - TYPE_TUNER_SET_OPTION iTunerSet - Determines how to set the tuner PLL frequency
//                                          by channel, by center frequency(Khz)  or by picture carrier(Khz).
//                                        - unsigned long ulSetValue - holds the value to set according to iTunerSet channel, or center frequency(Khz)  or by picture carrier(Khz).
//                                        - CHANNEL_TABLE_TYPE iChannelTableType - determines which channel table will be selected to get the tuner pll frequency from the channel number.
//                                              this field in needed only when the iTunerSet = TUNER_SET_CHANNEL is selected (not valid for TUNER_THOMSON_T_2000).      
//                                        - TYPE_TUNER_AGC_MODE iAgcMode - determines the agc mode can be digital or analog.
//                                        - TYPE_TUNER_INPUT_SELECTION iInputSelection - determines the input selection terrestrial or cable (valid only for TUNER_THOMSON_T_2000).     
//                                              
// Argument         : unsigned short usDelay -  this parameter is used determine the delay between the set tuner PLL frequency operation and the cascade2B DSP channel change command.
//                                                                                              The delay value is multiplied by 10000 and than it is decremented in a loop each time by one until the value reaches to 0. The delay time
//                                                                                              will be influenced by the processor speed.
//                                                                                              Set the usDelay value to 0 when only a set tuner PLL frequency operation takes place.   
// Argument         : CAS_2B_CHANNEL_CHANGE_PARAMETERS* pstChannelChangeParameters - this parameter is a pointer the a struct that holds all the parameters needed for a
//                                        Cascade2B DSP channel change operation. Set the pstChannelChangeParameters value to NULL when only a set tuner PLL frequency operation takes place.
//                                        The struct fields are:
//                                        - TYPE_RECEIVER_MODE iReceiverMode: Describes to which receiver mode to change if needed.
//                                        - TYPE_CARRIER_ACQUISITION iCarrierAcquisition: Describes the carrier acquisition - normal, wide.
//                      this parameter has to be set only for the VSB and QAM Annex B  recievers
//                                        - TYPE_INVERSE_SPECTRUM iInverseSpectrum: Describes if inverse spectrum is on or off
//                      this parameter has to be set only for the VSB recievers
//-----------------------------------------------------------------------------------------------------------
//unsigned int __stdcall SetChannel( CAS_2B_TUNER_PARAMETERS stTunerParameters,unsigned short usDelay,CAS_2B_CHANNEL_CHANGE_PARAMETERS* pstChannelChangeParameters);


int DTVS205FH201A_Init(TUNER_INIT_PARAMETERS InitParam[2]);
int DTVS205FH201A_SetChannel( CAS_2B_TUNER_PARAMETERS* pstTunerParameters,unsigned short usDelay,CAS_2B_CHANNEL_CHANGE_PARAMETERS* pstChannelChangeParameters);
int DTVS205FH201A_GetInfo( CAS_2B_TUNER_GET_PARAMETERS* pstTunerParameters);

#endif


#if 0
//For Tuner DTT7611
typedef enum EN_TYPE_TUNERDTT7611_REF_DIVIDER_RATIO{
        TUNERDTT7611_REF_DIVIDER_RATIO_31_25 = 0,
        TUNERDTT7611_REF_DIVIDER_RATIO_50,
        TUNERDTT7611_REF_DIVIDER_RATIO_62_5,
        TUNERDTT7611_REF_DIVIDER_RATIO_166_7
}TYPE_TUNERDTT7611_REF_DIVIDER_RATIO;

typedef enum EN_TYPE_TUNERDTT7611_AGC{
        TUNERDTT7611_AGC_102_A = 0,
        TUNERDTT7611_AGC_102_B,
        TUNERDTT7611_AGC_99,
        TUNERDTT7611_AGC_96,
        TUNERDTT7611_AGC_93,
        TUNERDTT7611_AGC_90,
        TUNERDTT7611_AGC_WIDE_BAND_OFF
}TYPE_TUNERDTT7611_AGC;

typedef enum EN_TYPE_TUNERDTT7611_CHARGE_PUMP{
        TUNERDTT7611_CHARGE_PUMP_60 = 0,
        TUNERDTT7611_CHARGE_PUMP_280
}TYPE_TUNERDTT7611_CHARGE_PUMP;

typedef enum EN_TYPE_TUNERDTT7611_AGC_TIME_CONSTANT{
        TUNERDTT7611_AGC_TIME_CONSTANT_50_MS = 0,
        TUNERDTT7611_AGC_TIME_CONSTANT_2_SEC
}TYPE_TUNERDTT7611_AGC_TIME_CONSTANT;


#define DTT7611_DEVICE_ADDRESS_WRITE  0xC2              // can be read from i2c. Tuner I2C address
#define DTT7611_SLAVE_ADDRESS 0x86      // Alex modify , 0x86  PIN open, can be read from i2c. Tuner IF address


#define DTT7611_CHANNEL_DOES_NOT_FIT_ANY_FREQUENCY -1
#define DTT7611_SUCCESS 0
#define DTT7611_FREQUENCY_VALUE_OUT_OF_RANGE 1
#define DTT7611_VALUE_OUT_OF_RANGE 2
#define DTT7611_COULD_NOT_SET_N 3
#define DTT7611_BEFORE_SEND_BYTES_FAILED 4
#define DTT7611_AFTER_SEND_BYTES_FAILED 5
#define DTT7611_SEND_CONTROL_DATA_FAILED 6
#define DTT7611_CHANNEL_OUT_OF_RANGE 7

#define DTT7611_LOW_BAND_MIN 55250
//#define DTT7611_LOW_BAND_MAX 145250
//#define DTT7611_LOW_BAND_MAX 147000
#define DTT7611_LOW_BAND_MAX 149000
#define DTT7611_MID_BAND_MIN 151250
//#define DTT7611_MID_BAND_MAX 415250
//#define DTT7611_MID_BAND_MAX 417000
#define DTT7611_MID_BAND_MAX 419000
#define DTT7611_HIGH_BAND_MIN 421250
//#define DTT7611_HIGH_BAND_MAX 859250
#define DTT7611_HIGH_BAND_MAX 870000
#define DTT7611_F_IF_KHZ 44000
#define DTT7611_N_MAX 32768 //15 bits

//For DTT7612 
#define FM_MIN_VALUE 88000
#define FM_MAX_VALUE 108000
#define FM_DTT7612_F_IF_KHZ 41300

int TunerDTT7611SendChannel(unsigned int uiChannel, int iAdjustFreqKHZ, CHANNEL_TABLE_TYPE iChannelTable,TYPE_TUNERDTT7611_REF_DIVIDER_RATIO iRefDividerRatio,unsigned int uiAgc, unsigned int uiAgcMode,unsigned int uiChargePump,unsigned int uiAgcTimeConstant);
int TunerDTT7611SendFreq(unsigned long ulFrequency,TYPE_TUNERDTT7611_REF_DIVIDER_RATIO iRefDividerRatio,unsigned int uiAgc, unsigned int uiAgcMode,unsigned int uiChargePump,unsigned int uiAgcTimeConstant);
int TunerDTT7611SendPicCarrier(unsigned long ulFrequency,TYPE_TUNERDTT7611_REF_DIVIDER_RATIO iRefDividerRatio,unsigned int uiAgc, unsigned int uiAgcMode,unsigned int uiChargePump,unsigned int uiAgcTimeConstant);
void DTT7611SetCP(unsigned int uiChargePump,unsigned char* pucCb);
void DTT7611SetStepSize(TYPE_TUNERDTT7611_REF_DIVIDER_RATIO iRefDividerRatio, unsigned char* pucCb,unsigned char* pucCb2);
void DTT7611SetAGC(unsigned int uiAgc,  unsigned char* pucAb);
void DTT7611SetATC(unsigned int uiAgcTimeConstant,unsigned char* pucAb);
void DTT7611InitBytes(unsigned char* pucDb1,unsigned char* pucDb2,unsigned char* pucCb,unsigned char* pucBb,unsigned char* pucAb,unsigned char* pucCb2);
BOOLEAN TunerDTT7611SetRFFreq(unsigned long ulFrequency,unsigned int uiAgcMode,unsigned char* pucBb);
BOOLEAN DTT7611SetN(unsigned long ulFrequency,TYPE_TUNERDTT7611_REF_DIVIDER_RATIO iRefDividerRatio,     unsigned char* pucDb1,unsigned char* pucDb2);
unsigned int  DTT7611SendControlData(unsigned int uiAgcMode,unsigned char Db1,unsigned char Db2,unsigned char Cb,unsigned char Bb,unsigned char Ab,unsigned char Cb2);
unsigned long TunerDTT7611GetFrequency(unsigned int uiChannelNumber,CHANNEL_TABLE_TYPE iChannelTable);

//-----------------------------------------------------------------------------------------------------------
// Function name        : SetTunerDTT7611
// Description      : controls the Thomson DTT7611 tuner
// Return type          : INT: 0 - Succeeded to set the tuner, other value - Did not succeed to set the tuner
// Argument         : TYPE_TUNER_SET_OPTION TunerSet: Determines how to set the tuner PLL frequency
//                    by channel, by center frequency(Khz)  or by picture carrier(Khz).
// Argument         : void* pvTunerSet: The value to set according to TunerSet.
// Argument                     : CHANNEL_TABLE_TYPE iChannelTableType - determines which channel table will be selected to get the tuner pll frequency from the channel number.
// Argument         : TYPE_TUNERDTT7611_REF_DIVIDER_RATIO: Determines the reference divider ratio for the tuner 
// Argument         : TYPE_TUNERDTT7611_AGC: Determines the AGC value for the tuner
// Argument         : TYPE_TUNER_AGC_MODE: Determines if the tuner will internal AGC digital or analog
//                                        the default value is TUNERDTT7611_AGC_MODE_EXTERNAL   
// Argument         : CHARGE_PUMP: Determines the charge pump value 
// Argument         : TYPE_TUNERDTT7611_AGC_TIME_CONSTANT: Determines the AGC time constant value, 
//-----------------------------------------------------------------------------------------------------------
int __stdcall SetTunerDTT7611(TYPE_TUNER_SET_OPTION TunerSet, void* pvTunerSet, int iAdjustFreqKHZ,
                                        CHANNEL_TABLE_TYPE iChannelTable,
                                        TYPE_TUNERDTT7611_REF_DIVIDER_RATIO iRefDividerRatio,
                                        TYPE_TUNERDTT7611_AGC iAgc,
                                        TYPE_TUNER_AGC_MODE iAgcMode,
                                        CHARGE_PUMP iChargePump,
                                        TYPE_TUNERDTT7611_AGC_TIME_CONSTANT iAgcTimeConstant);




//-----------------------------------------------------------------------------------------------------------
// Function name        : __stdcall SetChannel
// Description      : This function sets the tuner PLL frequencyand sends channel change command to the cascade2B DSP right after the 
//                                        tuner freuency was set. This function can perform set tuner PLL frequencyand operation by passing the parameters
//                                        usDelay = 0 and pstChannelChangeParameters = NULL
// Return type          : unsigned int - 0 If CC succeeded, a number greater than zero - if CC did not succeeded.
// Argument         : CAS_2B_TUNER_PARAMETERS stTunerParameters - this struct holds the parameters for the set tuner PLL frequencyand operation
//                                        The struct fields are:        
//                                        - TUNER_TYPE iTunerType - set the tuner type TUNER_DTT7611, TUNER_DTT7612 or TUNER_THOMSON_T_2000
//                                        - TYPE_TUNER_SET_OPTION iTunerSet - Determines how to set the tuner PLL frequency
//                                          by channel, by center frequency(Khz)  or by picture carrier(Khz).
//                                        - unsigned long ulSetValue - holds the value to set according to iTunerSet channel, or center frequency(Khz)  or by picture carrier(Khz).
//                                        - CHANNEL_TABLE_TYPE iChannelTableType - determines which channel table will be selected to get the tuner pll frequency from the channel number.
//                                              this field in needed only when the iTunerSet = TUNER_SET_CHANNEL is selected (not valid for TUNER_THOMSON_T_2000).      
//                                        - TYPE_TUNER_AGC_MODE iAgcMode - determines the agc mode can be digital or analog.
//                                        - TYPE_TUNER_INPUT_SELECTION iInputSelection - determines the input selection terrestrial or cable (valid only for TUNER_THOMSON_T_2000).     
//                                              
// Argument         : unsigned short usDelay -  this parameter is used determine the delay between the set tuner PLL frequency operation and the cascade2B DSP channel change command.
//                                                                                              The delay value is multiplied by 10000 and than it is decremented in a loop each time by one until the value reaches to 0. The delay time
//                                                                                              will be influenced by the processor speed.
//                                                                                              Set the usDelay value to 0 when only a set tuner PLL frequency operation takes place.   
// Argument         : CAS_2B_CHANNEL_CHANGE_PARAMETERS* pstChannelChangeParameters - this parameter is a pointer the a struct that holds all the parameters needed for a
//                                        Cascade2B DSP channel change operation. Set the pstChannelChangeParameters value to NULL when only a set tuner PLL frequency operation takes place.
//                                        The struct fields are:
//                                        - TYPE_RECEIVER_MODE iReceiverMode: Describes to which receiver mode to change if needed.
//                                        - TYPE_CARRIER_ACQUISITION iCarrierAcquisition: Describes the carrier acquisition - normal, wide.
//                      this parameter has to be set only for the VSB and QAM Annex B  recievers
//                                        - TYPE_INVERSE_SPECTRUM iInverseSpectrum: Describes if inverse spectrum is on or off
//                      this parameter has to be set only for the VSB recievers
//-----------------------------------------------------------------------------------------------------------
//unsigned int __stdcall SetChannel( CAS_2B_TUNER_PARAMETERS stTunerParameters,unsigned short usDelay,CAS_2B_CHANNEL_CHANGE_PARAMETERS* pstChannelChangeParameters);


int DTT7611_Init(TUNER_INIT_PARAMETERS InitParam[2]);
int DTT7611_SetChannel( CAS_2B_TUNER_PARAMETERS* pstTunerParameters,unsigned short usDelay,CAS_2B_CHANNEL_CHANGE_PARAMETERS* pstChannelChangeParameters);
int DTT7611_GetInfo( CAS_2B_TUNER_GET_PARAMETERS* pstTunerParameters);
#endif


#endif